Want create site? Find Free WordPress Themes and plugins.

Freestanding Laundry and Dishwashing 

Our expert delivery team can install your freestanding washing machine, washer dryer or dishwasher when it is delivered to makea sure you are up and running as soon as possible.


Here’s what our expert delivery team will do for you:

  • Unpack the appliance and, if applicable, remove the transit bolts from the rear of the unit
  • Connect the appliance to an existing water supply and waste pipe
  • Plug the appliance into your existing power supply
  • Adjust the feet to ensure that the appliance is level
  • Dispose of any packaging into a neat pile for you to recycle

Please double check the following before you order:

  • Make sure that you have measured your gap correctly. You will require 5mm clearance so please be sure that space is at least 5mm larger than the manufacturer measurements.
  • When taking measuring the depth of your space remember that the majority of manufacturer dimensions do not include the control panel knobs and dials. Please keep this in mind when ordering.
  • Make sure you have an existing water supply, waste pipe and electrical connection.

 

Integrated Laundry and Dishwashing 

If you are planning to purchase an integrated washing machine, washer dryer or dishwasher we can eliminate the hassle you may encounter when attempting to replace these specialist integrated appliances. Leave it to our experts who fit lots of these every week to ensure you are back up and running as soon as possible without the stress.

 
Here’s what our expert delivery team will do for you:

  • Remove the bottom kick plate/plinth from the kitchen units if removable
  • Remove the kitchen furniture door from your old appliance
  • Disconnect and remove the old appliance from the housing unit
  • Unpack the new appliance
  • Connect the new appliance to existing pipework and electrics
  • Attach your kitchen furniture door to the new appliance *if door needs to be re-drilled for the hinges this could incur extra charges.
  • Adjust the feet to ensure that the appliance is level and attach fixing screws and brackets where required
  • Dispose of any packaging into a neat pile for you to recycle

Please double check the following before you order:

  • Check the condition of your kitchen furniture door. If our fitters have trouble attaching new fittings due to poor furniture condition, we may not be able to re-attach the door for you.
  • Make sure that you have measured your gap correctly. You will require 5mm clearance so please be sure that space is at least 5mm larger than the manufacturer measurements.
  • If the space you wish us to fit the appliance is a new please make sure that joinery work and/or holes for pipes have been previously made through the side panels underneath your worktops to give adequate space to thread through cold water pipes, a waste water pipe and a 13 amp plug. These holes need to be approximately 5-10cm in diameter, depending on the type of appliance.
  • Please ensure that there are no gas pipes or water pipes that run around your kitchen skirting boards which will stop us from pushing the appliance back into its required position.
  • When choosing an integrated dishwasher please keep in mind that fully integrated and semi integrated models take a different size kitchen furniture door. Semi integrated dishwashers have a visible control panel on the front of the appliance and require a shorter door. A fully integrated dishwasher hides the whole front of the dishwasher and requires a full height door. You need to order the correct type of dishwasher or you will need to alter your door or even purchase a new door.

 

Freestanding Refrigeration

At Village Domestics Supplies we understand how hard it can be for you to try to get an appliance of this size into a suitable position in your kitchen without damaging the new machine or hurting yourself. This is why Village Domestics Supplies is renowned for our experienced and above all safe delivery teams.

Here’s what our expert delivery team will do for you:

  • Assess the best and safest route to enter your property with your new appliance
  • Unpack the new appliance
  • Manoeuvre the new appliance into space you require and plug it into a suitable 13 amp plug socket
  • Dispose of any packaging into a neat pile for you to recycle

 

Please double check the following before you order:

  • Make sure that you have measured your gap correctly. You will require 5mm clearance so please be sure that space is at least 5mm larger than the manufacturer measurements.
  • Please be aware that the majority of manufacturer dimensions do not include handles so please take this into account when deciding where your appliance is going to be situated. and from which side the door will hinge open. Will your doors open fully where you are planning to place your new appliance?

 

Integrated Refrigeration

Integrated refrigeration covers all built in fridges, freezers and fridge freezers. We are experts in this particular field and would ask you to call our store in situations where you are not quite sure before you order. We have been praised many, many times by our happy customers over the years due to our inside knowledge and expertise when advising on sizes and dimensions. We have saved many customers from ordering the wrong fit type or style before talking to us.


Here’s what our expert delivery team will do for you:

  • Remove bottom kick plate/plinth from the kitchen units if removable
  • Remove the kitchen furniture door from your old appliance
  • Disconnect and remove the old appliance from the housing unit
  • Unpack the new appliance
  • Connect the new appliance to existing pipework and electrics
  • Attach your kitchen furniture door to the new appliance
  • Level into position and attach the fixing screws & brackets where required.
  • Dispose of any packaging into a neat pile for you to recycle

 

Please double check the following before you order:

  • Do you need a built in or built under model? A built in fridge will not fit into a built under space as they are taller than a counter top.
  • Do you require a 50/50 or a 70/30 split fridge freezer? The dimensions of the doors will differ in size so you need to be sure you measure the height of your existing doors and check against the new product you are planning to purchase.
  • Do you require a sliding hinge or a fixed hinge? If you look at the fixings on your existing door you will be able to determine the difference between these two designs. Please refer to the product manuals available with each product on our website. 
  • Check that your existing kitchen furniture doors are in good condition as we cannot repair doors before fitting them on to your new appliance.

 

Freestanding Cooking Appliances

We are able to fit your freestanding electric cooker on the same day that it is delivered. Our fitters are not Gas Safe registered so gas appliances will need to be uninstalled by a qualified engineer before we can install or remove your appliance.

Here’s what our expert delivery team will do for you:

  • Assess the safest route to enter your property with your new appliance
  • Unpack the new appliance
  • Disconnect and remove the old appliance
  • Manoeuvre the new appliance into the space you require
  • Check all connections required to fit your appliance are present and in acceptable condition
  • Connect the new appliance to existing pipework/electrics
  • Test your appliance
  • Dispose of any packaging into a neat pile for you to recycle

 

Please double check the following before you order:

  • Check that you have an existing electric supply. (Gas cookers will also require an electrical supply to provide ignition.)
  • Check that these supplies are no further than 1 metre away from the space where your appliance will go.
  • Gas range cookers will require a larger diameter gas supply already in place if you are upgrading from a standard size cooker. Please refer to the product manual for the requirements.
  • Do you have the required ventilation in the room where the gas appliance is to be fitted? You will need a window or a door in the room for ventilation. If you do not please opt for an electric cooker instead.
  • Electric cookers will usually require a 32 amp supply to a hardwired socket. Your socket will indicate the power rating.
  • Check your product specification prior to purchase in the user manual on our website. The amp rating will tell you if you only require a 13 amp socket. If the rating is over 13 amp, you then require a 32 amp hardwired socket.
  • Check dimensions on any overhead cupboards. If your chosen cooker has a lid, will you be able to open the lid?

 

Built In/Built Under Ovens 

Our qualified electricians are able to fit you’re built In/built under oven on the same day it is delivered. Our fitters are not Gas Safe registered so gas appliances will need to be uninstalled by a qualified engineer before we can install or remove your appliance.

 

Here’s what our expert delivery team will do for you: 

  • Assess the safest route to enter your property with your new appliance
  • Unpack the new appliance
  • Disconnect and remove the old appliance
  • Manoeuvre the new appliance into the space you require
  • Check all connections required to fit your appliance are present and in acceptable condition
  • Connect the new appliance to existing pipework/electrics
  • Test your appliance
  • Dispose of any packaging into a neat pile for you to recycle

 

Please double check the following before you order:

  • Check that you have an existing  electrical supply. Gas ovens will also require a 13 amp socket for ignition.
  • Check that these supplies are no further than 1 metre away from the space where your appliance will go.
  • Do you have the required ventilation in the room where the gas appliance is to be fitted? You will need a window or a door in the room for ventilation. If you do not please opt for an electric cooker instead.
  • Electric built in ovens can work from a 13 amp or a 32 amp supply. Your socket will indicate the power rating.
  • Check your product specification prior to purchase in the user manual on our website. The amp rating will tell you if you only require up to 13 amp socket or, if the rating is over 13 amp, you require a 32 amp hardwired socket.
  • When choosing a built in oven please check your dimensions carefully. Please be aware that built in and built under double ovens are not the same dimensions and you must make sure you are replacing the correct type like for like. All technical drawings and dimensions are available on our website and in product specification manuals.

     

Gas or Electric Hobs

Our fitters are not Gas Safe registered so gas appliances will need to be uninstalled by a qualified engineer before we can install or remove your appliance.

 Here’s what our expert delivery team will do for you: 

  • Assess the safest route to enter your property with your new appliance
  • Unpack the new appliance
  • Disconnect and remove the old appliance
  • Manoeuvre the new appliance into the space you require
  • Check all services required to fit your appliance are present and in acceptable condition.
  • Connect the new appliance to existing pipework/electrics
  • Test your appliance
  • Dispose of any packaging if requested

 

Please double check the following before you order:

  • Check that you have an existing gas or electrical supply. Gas hobs will also require a 13amp socket for ignition.
  • Check that these supplies are no further than 1 metre away from the space where your appliance will go.
  • Do you have the required ventilation in the room where the gas appliance is to be fitted? You will need a window or a door in the room for ventilation. If you do not please opt for an electric hob instead.
  • Electric Hobs can work from a 13 amp plug or a 32 amp supply to a hardwired socket. Your socket will indicate the power rating your chosen hob will require.
  • Check your product specification prior to purchase in the user manual on our website. The amp rating will tell you if you only require up to 13 amp or, if the rating is over 13 amp, you require a 32 amp hardwired socket.
  • When choosing a hob please check your dimensions carefully. You cannot sit a larger hob directly into your existing worktop hole. Please must make sure that you are replacing the correct type like for like. All technical drawings and dimensions are available on our website and in product specification manuals. 
Did you find apk for android? You can find new Free Android Games and apps.